PRODUCTS

  • + DRAM Modules
  • + Solid State Drives (SSD)
    + Embedded Flash
    + Non-Volatile DIMM (ArxCis-NV™)
    + Application Optimized

Enterprise 2.5” SAS SSD

  • Overview
  • Technical Information

The Viking Technology Element Serial-Attached SCSI (SAS) SSD is designed to meet the high performance computing requirements for a variety of enterprise computing applications. Featuring a dual-ported 6Gb SAS interface and an advanced parallel NAND channel architecture, Element delivers best-in-class performance and availability for I/O intensive applications.

Element features unparalleled host to NAND write amplification efficiency for unprecedented endurance. Coupled with patented error correction capabilities and protection against normally catastrophic flash failures, Element’s architecture enables the use of Enterprise MLC (eMLC) flash technology for I/O workloads in enterprise applications that use to require SLC flash.

Features

  • Best in class sequential and random performance
  • SLC and Enterprise MLC (eMLC) NAND flash supported
  • Advanced SSD-specific SMART command support
  • Intelligent write management techniques for optimized endurance
  • Protection against catastrophic flash page and block failures
  • Patented power fail data protection ensures data integrity
  • Industrial-grade SSD with military-level environmental testing
  • Compatible with a wide variety SAS host controllers and expanders
  • Compatible with standard operating systems
Capacity
SLC50GB to 200GB
eMLC100GB to 400GB
Performance
Sustained Read / Write240 MB/s
Sustained Random Read & Write IOPSUp to 29,000 IOPS
InterfaceSAS 6Gb/3Gb, Dual-ported, Hot-pluggable
Variable sector sizes: 512/520/524/528
Reliability
ECCUp to twelve 9-bit symbols per 512 byte sector
Bit Error Rate (BER)< 1 in 1017 bits read
Power Fail Data ProtectionSuper Capacitor
Tiered Error ProtectionData recovery from page and block failures, End-to-end CRC protection.
Endurance5 Years *
Temperature MonitoringOn-board sensor, SMART attribute
Environmental
Shock50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular axes X, Y, Z
Vibration16.4g rms 10-2,000 Hz, 3 axes
Operating Temperature - Commercial0°C to 70°C
Non-operating Temperature-40°C to 85°C
Altitude80,000 feet
Humidity5% to 95%, non-condensing, relative
Test StandardMIL-STD-810F
Safety / Agency ComplianceFCC, CE, TUV
Power
Voltage5V + 10%
Active2.0 watts at max capacity
Idle0.9 watts
Form Factor
Length100.2mm
Width69.9mm
Height9.5mm

Form Factor