
The Viking Technology Element Industrial SSD delivers unmatched performance and endurance making it the perfect choice for a wide variety of embedded and industrial computing applications. Element SSD features a native 3Gb SATA interface and an advanced feature set to increase computing efficiencies and deliver new levels of data integrity and reliability.
Element 2.5” SSD features an unparalleled host to NAND writes amplification efficiency, for unprecedented endurance. Coupled with patented error correction capabilities and protection against normally catastrophic flash failures, Element’s architecture enables MLC flash technology for enterprise applications.
![]() |
|
| Capacity | |
| SLC | 50GB to 200GB |
| MLC / eMLC | 50GB to 400GB |
| Performance | |
| Sustained Read / Write | 260 MB/s |
| Sustained Random Read & Write IOPS | Up to 30,000 IOPS |
| Interface | SATA 3Gb/1.5Gb, S.M.A.R.T., NCQ, hot pluggable |
| Reliability | |
| ECC | Up to twelve 9-bit symbols per 512 byte sector |
| Bit Error Rate (BER) | < 1 in 1017 bits read |
| Tiered Error Protection | Data recovery from sector, page, and block failures. End to end CRC protection. |
| Endurance | 5 Years * |
| Temperature Monitoring | On-board sensor, SMART attribute |
| Environmental | |
| Shock | 50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular axes X, Y, Z |
| Vibration | 16.4g rms 10-2,000 Hz, 3 axes |
| Operating Temperature - Commercial | 0°C to 70°C |
| Operating Temperature - Industrial | -40°C to 85°C |
| Non-operating Temperature | -40°C to 85°C |
| Altitude | 80,000 feet |
| Humidity | 5% to 95%, non-condensing, relative |
| Test Standard | MIL-STD-810F |
| Safety / Agency Compliance | FCC, CE, TUV |
| Power | |
| Voltage | 5V + 10% |
| Active | 2.0 watts |
| Idle | 0.9 watts |
| Dimensions | |
| Length | 100.2mm |
| Width | 69.9mm |
| Height | 9.5mm |
* Performance throttling may be engaged to ensure 5-year endurance.